Mesin Uji Impak Charpy Suhu Rendah BDW-Y (-60°C hingga -80°C) Berbasis Komputer
Aplikasi:
JBDW-Y Mesin Uji Impak Charpy Otomatis Suhu Rendah dengan Kontrol Komputer digunakan untuk mengukur ketahanan material logam terhadap beban dinamis, guna menentukan sifat material di bawah kondisi pembebanan dinamis.
Mesin ini merupakan peralatan pengujian yang penting dan wajib digunakan, tidak hanya di bidang metalurgi, manufaktur mesin, dan industri terkait, tetapi juga banyak dimanfaatkan dalam penelitian ilmiah dan pengembangan material.
Standar:
ASTM E23, ISO148-2006 and GB/T3038-2002, GB/229-2007.
Spesifikasi:
| Model | JBDW-300Y | JBDW-500Y |
| Impact Energy | 150 J / 300 J | 250 J / 500 J |
| Value Of Every Grid | 1 J | |
| Control Methods | Computer Full Automatic Control | |
| The Distance Between The Pendulum Shaft And Impact Point | 750 mm | 800 mm |
| Impact Speed | 5.2 m/s | 5.4 m/s |
| Impact Pendulum Configuration | 150 J, 1 PC; 300 J, 1 PC | 250 J, 1 PC; 500 J, 1 PC |
| Pre-rising Angle Of The Pendulum | 150° | |
| Specimen Bearer Span | 40+0.2 mm | |
| Round Angle Of The Jaw | R 1.0~1.5 mm | |
| Round Angle Of Impact Edge | R 2.0~2.5 mm(SpecialOrder:R8±0.05mm) | |
| Angle Accuracy | ±0.1° | |
| Standard Specimen Dimension | 10 mm*10(7.5 or 5) mm*55 mm | |
| Thickness Of Impact Knife | 16 mm | |
| Cooling Way | Compressor Refrigeration | |
| Capacity Of Sample Box | 20 PCS | |
| Range Of Low Temperature | 0°C ~ -60°C Or 0°C ~ -80°C | |
| Precision Of Controlling Temperature | Fluctuation ±0.5°C Grades 1°C | |
| Power Supply | 3phs, 380V, 50Hz | |
| Dimensions | 2124 mm * 600 mm * 1340 mm | |
